These instructions apply to the following models:
Step 1. Locate arrows on spool.
Step 2. Turn spool until arrows are over the eyelets.
Step 3. Cut 2 9’ (2.7m) length of line (see chart below).
Step 4. Insert one line into each eyelet securely.
Step 5. To re-wind line back into the head, first place right hand on bottom of the trimmer head and hold trimmer head body stationary. Place left hand on knob and twist with arrow.
Step 6. Twist knob until the line length (free end) retracts and just reaches the line cutter on the debris shield.
Step 7. You are ready to operate.
Line Specifications:
Model no. UN-62 holds 18’ 5.7m of .095 2.4mm Line
